Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Cepillo de Una Cara Automático Modelo AN-926 15HP
Model Number: 5113



Length: 42½ in. (108 cm)
Width: 33 in. (34 cm)
Height: 49 in. (125 cm)

The Baker Model AN-926 Automated Single Planer was designed and constructed to provide years of trouble-free operation in rugged, industrial environments.

It features a helical cutter head with reversible carbide knives, allowing for longer cutter head life than conventional, straight blade cutter heads.
Knife changes are quick and easy because of the self-seating design of the knives.

The  AN-926 also features a rubber infeed roller with a sectional chip breaker, and two rubber outfeed rollers. The castiron table is supported by four massive columns, and the planer frame is built with heavy plate steel, so vibration is minimized.

The Baker AN-926 Planer will accommodate any planing application, from rough to finish work, as well as multiple-piece planing.

  • Can plane stock material as thin as ¼” (6 mm) and as thick as 12” (300 mm).
  • Minimum board length: 10” (250mm).
  • Maximum board width: 26” (660 mm). Maximum planing width: 24” (610 mm).
  • Helical cutter head provides lower noise level, less power, and lower maintenance.
  • The helical cutter head features multiple carbide knife inserts that can be rotated three times before replacing.
  • Cutters are powered by a 10 HP (7.5 kw) electric motor or, optionally, a 15-HP (11 kw) motor.
  • Convenient control panel allows operator to instantly change the table height and start and stop any motor.
  • Table height setting can be set numerically, by keying the value in on the control panel.
  • Simple to set up and use.
  • Rubber infeed and outfeed rollers provide smooth, consistent positive feeding of material.
  • Several safety features, including anti-kickback fingers on infeed.
  • Heavy-duty design and build, with cast-iron table, heavy plate steel frame, so vibration is minimized.
Specifications
  • Number of planer cutter heads: 1
  • Dust Output: 5 in. (125 mm) dust outlet diameter. 1,200 CFM (34 m³/min) recommended.
  • Dimensions & Weight:
    • Length: 42½ in. (1,080 mm)
    • Width: 33 in. (840 mm)
    • Height: 49 in. (1,250 mm)
    • Net Weight: 1,800 lbs. (800 kg)
    • Gross Weight: 2,000 lbs. (880 kg)
Power
  • 240v, 3-phase
  • 480v, 3-phase
  • 575v, 3-phase
  • Main cutter head: 10-HP (7.5 kw) 3-phase electric motor
    • Optionally, a 15-HP (11 kw) motor can be substituted.
  • Table raise & lower: ¼-HP (0.187 kw) 3-phase electric motor
  • Feed motor: 1-HP (0.75 kw) 3-phase electric motor
Feedworks and Capacities
  • Feed speed: Fully variable 20 to 60 fpm (6 to 18 m per minute)
  • Material Capacity:
    • Maximum Board Width: 26 in. (660 mm)
    • Planing Width: 24 in. (610 mm)
    • Planing Thickness: ¼ to 12 in. (6 to 300 mm)
  • Table area: 26 by 33 in. (660 by 840 mm)
Cutters
  • Type: Helical cutter head consisting of 168 replaceable, carbide knives in six slots
  • Cutter head speed: 4,500 RPM
  • Knife dimensions: ⁷⁄₁₆” by ⁷⁄₁₆” by ¹⁄₁₆” (14 x 14 x 2 mm)
  • Each replaceable carbide knife has four cutting edges, so when it’s damaged or dulled, it can be rotated 90° to expose a new cutting edge. It’s like getting four blade changes for the price of one! Helical cutter heads can last up to eight times longer than conventional, straight blade cutters.
  • Maximum cutter depth: ⅜ in. (9 mm)
  • Cutter head diameter: 5 in. (125 mm)

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74