SAWMILLS - BAKER PRODUCTS - Moldurera de 4-Cabezales Modelo M412

COMPRA DE PRODUCTOS

EQUIPOS NUEVOS

Reaserradoras de Un Solo Corte

Reaserradoras de Corte Múltiple

Aserraderos de Sierra Cinta

Scragg Mills

Desorilladoras de Tablas

Sierras Tronzadoras y Recortadoras

Resacadoras / Equipos para Tarimas

Desempolvadores de Tablas

Cepillos / Molduradoras

Transportadores / Plataformas de...

Equipos Especiales de Baker

Bastidores para Apilamiento de M...

Depósito de Acero de Auto Descarga

EQUIPOS USADOS

VENTAS EN CONSIGNACIÓN

INVENTARIO EN STOCK

PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS

Moldurera de 4-Cabezales Modelo M412

Model Number: 5900

Length: 49 in. (124.5 cm) w/o tables
Width: 32 in. (81.3 cm)
Height: 48 in. (121.6 cm)

The Baker Model M-412 Four-Side Planer/Moulder is just right for professionals who are needing an economical, compact planer and moulder unit. The M-412 features four cutting modes and 4-sided planing and moulding. It is designed for easy set up and extended use.

The Baker M-412 Planer/ Moulder’s entire table can be raised and lowered via a digital input with keypad and digital display. You can use a hand crank as a manual override. A variable feed speed allows you to plane and mould hard and soft woods.

The M-412 automatically stops whenever the top guard is opened. And, it’s equipped with three depth-of-cut control plates for the bottom cutterhead and individual motors for each moulding spindle.

Four cutting modes: single-, two-, three-, and four-sided moulding and planing.
Planing capacity: 13” (330 mm) wide by .39” to 9” (10 mm to 230 mm) tall.
2-sided planing or moulding capacity: 13” (330 mm) wide by 9” (230 mm) tall.
4-sided planing or moulding capacity: 12” (300 mm) wide by 2” (51 mm) inches tall, standard.
Extremely accurate digital table height position control via keypad or hand crank.
7,000 RPM spindle speed.
Individual motors power each spindle.
Variable feed speed: 11 to 52 feet per minute (3.35 to 15.85 meters per minute).
See-through top guard for viewing cutter head.
Comes with 48”-long infeed and outfeed tables.
Compact design takes up little floor space: 49” long by 32” wide)
Heavy duty, low maintenance.
Centralized controls make operation simple and easy.
Extremely high quality, professional and accurate results.
Top, bottom, left, and right planing knives provided.

Specifications

Number of spindles: 4
Dust Output: Four 4-in. (102 mm)-diameter dust outlets. 900 CFM (25.5 m³/min) recommended for each outlet. 3,600 CFM (102 m³/min) total.
Dimensions & Weight:
- Length: 49 in. (124.5 cm) without tables
- Width: 32 in. (81.3 cm)
- Height: 48 in. (121.6 cm)
- Net Weight: 1,400 lbs. (635 kg)
- Gross Weight: 1,610 lbs. (730 kg)

Power

240v, 3-phase
480v, 3-phase
575v, 3-phase
Spindle Motors (individual motors drive each spindle):
- Top horizontal spindle: One 7.5 HP (5.5 Kw) motor
- Bottom horizontal spindle: One 5 HP (3.7 Kw) motor
- Right & left spindles: Two 4.1 HP (3 Kw) motors
- Feed system: One ½ HP (0.375 Kw) motor

Feedworks and Capacities

Feed speed: Fully variable 11 to 52 fpm (3.35 to 15.85 m per minute)
Material Capacity:
- Planing Width: 13 in. (365 mm)
- Planing Thickness: 7/16 to 9 in. (12 to 230 mm)
- 2-sided Planing/Moulding Width: 13 in. (330 mm)
- 2-sided Planing/Moulding Thickness: 7/16 to 9 in. (12 to 230 mm)
- 4-sided planing/moulding width: 0 to 12 in. (0 to 306 mm)
- 4-sided planing/moulding thickness: 7/16 to 2 in. (12 to 51 mm), standard*
Table area: 44¼ by 27 in. (1,125 by 685 mm)
Table elevation: 9 in. (230 mm)

*Up to 4” with optional cutter head

Spindles

	Top Horizontal Spindle	Bottom Horizontal Spindle	Left/Right Vertical Spindles
Width	17 15/16 in. (455 mm)	13 5/8 in. (346 mm)	n/a
Max Planing Depth	5/16 in. (8 mm)	¼ in. (6 mm)	(max. cutting height) 2 in. (51 mm)*
Max Moulding Depth	¾ in. (19 mm)	³/16 in. (5 mm)	(max. cutting depth) ¹³/16 in. (21 mm)
Speed	7,000 RPM	7,000 RPM	7,000 RPM
Spindle Diameter	n/a	n/a	1¼ in (31.75 mm)
Cutter Head Diameter	2¾ in. (72 mm)	2¾ in. (72 mm)	3½ in. (90 mm)
Max Cutter Head Dia.	n/a	n/a	5½ in. (140 mm)

Other Features

Convenient vertical spindle adjustment
Simultaneous planing and moulding
Table can be raised & lowered accurately with digital meter
Optional vertical spindle cutter; choice of 2- or 4-knife configuration
Digital position control provides fast and accurate thickness adjustment
Works great with dry hard and soft woods (6% to 12% moisture content)

Especificaciones de producto sujetas a cambios sin previo aviso.