Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Acanalador Baker de Saque Horizontal I
Model Number: Acanalador Baker de Saque Horizontal I



Length: 48 in. (121.9 cm)
Width: 48 in. (121.9 cm)
Height: 41½ in. (105.4 cm)

Strapping products to a pallet can cause damage to both the pallet and your product. Sometimes you need more structure, such as wooden strips like the one shown above. Baker now has machines to quickly and easily make these banding strap strips. They’re called Banding Notch Groovers, and there are two versions of them.

With Version I, simply insert a board up to 10 inches wide and out comes two strips ready for packaging. Three 14-inch-diameter circular blades and two dado cutter heads do the cutting.

Version II simple makes one notch per board run through it. No ripping is done. It is fully adjustable. It will accept boards up to 8 inches wide. Either Baker Banding Notch Groover is a real value, designed for many years of operation with very low maintenance.

  • 20-hp TEFC electric motor
  • Accepts boards measuring at least 24” long, up to 10” wide, and up to 1¾” thick
  • Saws material into two banding strap strips, each measuring 2¼” wide, standard
  • Makes a 7/8”-wide notch, 3/8” deep, in both strips.
  • Hydraulic feedworks
  • Variable speed flow control valve for feedworks
  • Feedworks stop switch on both sides of machine. Both must be on for the feedworks to run.
  • Hood can be opened for maintenance
  • Safety switch on hood prevents saw from running while hood is open
  • Comes with two wrenches for changing blades and cutter heads
  • Very simple design
  • Takes up little floor space

    Specifications
    • Production (typical): Running 40”-long pieces at 60 lf/min., you can expect about 2,000 pieces an hour (making two at a time).
    • Recommended Air Flow: 1,300 CFM (37 m³/min.) through one 6” (15.24 cm) dust chute
    • Dimensions:
      • Length: 48 in. (121.9 cm)
      • Width: 48 in. (121.9 cm)
      • Height: 41½ in. (105.4 cm)
      • Weight: 2,500 lbs. (1,134 kg)
    • Feedspeed: 0 to 120 feet per minute (0 to 36 m/min)
    Power
    • One Electric Motor: One 20-hp (15 kw) TEFC
    • Electrical: 240v or 480v. 3-Phase, 60Hz (Standard) All other voltages are available. Completely prewired. NEMA 12 enclo-sure with disconnect, starter and circuit overload protection.
    Capacities
    • Board Width:
      • 2½ in. (5 cm) minimum to 10 in. (25.4 cm) maximum.
      • 6 in. (15.24 cm) typical to make two strips.
    • Board Height/Thickness: 1¼ in (3.2 cm) to 1¾ in (4.4 cm)
    • Board Length: Minimum: 24 in (61 cm);  Maximum: No maximum
    Options
    • More circular blades (for Version I only)
    • More dado cutters
    • More spacers

    Especificaciones de producto sujetas a cambios sin previo aviso.





     



    2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
    (800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
    Website Privacy Policy | Powered by Element 74