Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Chaflanadora Modelo Baker SureChamfer™
Model Number: Chaflanadora Modelo Baker SureChamfer™



Height: 58 in. (1.47 m)
Width: 48 in. (1.22 m)
Length: 160 in. (4 m)

Fast, easy, smooth operation. The new Baker SureChamfer™ is the premier high-production chamfering machine for quality pallet material. The Baker SureChamfer has been engineered to suit your needs better than any other chamfer machine on the market.

Changing the set up is easier than ever. Simply change the chamfer length adjustment cam and adjust the outfeed hopper for the new board length, and you’re done! So, change-over time is now less than five minutes. The feed system is tilted at a 20° angle to keep material aligned before and after entering the cutter head. This helps prevent jams. You can expect production of up to 1,600 boards per hour with the Baker SureChamfer.

  • Floating cutter automatically adjusts to allow for board variances, so identical chamfers are produced.
  • Chain drive automatically pulls one board from the infeed hopper, through the cutter head, and re-stacks it in the outfeed hopper.
  • Adjusting the machine for a new board length is very easy. Simply change the chamfer length adjustment cam and the outfeed hopper.
  • Adjusting the board width is easy, too.
  • Chamfers boards from 3” to 6” in width and from 30” to 56” inches in length.
  • All electric. No air. No hydraulics. No proximity switches or limit switches! Built out of solid, state-of-the art components.
  • 20° tilt of conveyor keeps material aligned before and after entering the cutting head.
Specifications
  • Production Rate: Around 1,600 pieces per hour
  • Cutters: Two 8 wing × 10” (254 mm) diameter, replaceable tip
  • Dimensions & Weight:
    • Length: 160” (4 m)
    • Width: 48” (1.22 m)
    • Height: 58” (1.47 m)
    • Weight: 1,600 lbs. (726 kg)
  • Sawdust Removal: 6” (152 mm) outlet, 2,000 CFM (57 m³/min) recommended for chip removal
Power
  • Cutter Motors: Two 5-HP (3.7 kw)
  • Feed Motor: 3-HP (2.24kw)
  • Electrical: All voltages available; Standard: 240v or 480v, 3-phase, 60Hz; machine completely prewired; NEMA 12 enclosure with starters,  disconnects, control voltage transformer and circuit overload protectors; start/stop station with E-stop button
Capacities
  • Material Width: Minimum: 3” (7.62 cm) Maximum: 6” (15.24 cm)
  • Material Length: Minimum: 30” (76.2 cm) Maximum: 56” (142.2 cm)
  • Material Thickness: Minimum: 3/8” (9.5 mm) Maximum: 1½” (38.1 mm)
Other Pallet Machinery
  • Baker Band Resaws
  • Staging Conveyors
  • Waste Conveyors
  • Stacking Racks
  • DeDusters
  • Band Edgers
  • Band Double-End-Trims
  • MultiSelect Cut-Off Saws
  • Single Notchers
  • Double Notchers
  • Steel Hoppers
  • Off-Bearing Conveyors
  • Scragg Mills
  • Unscramblers
  • Cant Sizers

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74