Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Desempolvador de Tablas M4i
Model Number: Desempolvador de Tablas M4i



Length: 108 in. (2.74 m)
Width: 36 in. (91.44 cm)
Height: Varies*

*See Specs & Options

The Baker M4i DeDuster has been designed to be a super-high-performance dust removal machine that will accept and remove sawdust from the highest production multi-head horizontal band resaw today. The M4i DeDuster can operate at over 700 feet per minute!

Boards drop into the M4i DeDuster hopper. The hopper’s height adjustment (for the amount of lumber), indexable stops (for the length of the lumber), and adjustable fence (for the width of the lumber) allow you to set it up for the most efficient operation. This virtually eliminates jam-ups. The hopper’s variable-speed conveyor sends the lumber through the M4i DeDuster chamber one piece at a time. The rear height adjustment of the conveyor can be adjusted from a minimum of 24” and up to 34” maximum.

Inside the M4i DeDuster chamber, highspeed brushes clean all four sides of the boards. The independently powered brushes are fully adjustable for longer brush life. The specially designed chamber maximizes air flow, directing the dust out the dust chamber instead of back onto the boards. The entire side of the chamber easily opens for full open accessibility.

The Baker M4i DeDuster comes with its own electrical panel and a stand-mounted, remote start/stop control station.

Specifications
  • Dimensions :
    • Length: 108 in (2.74 m)
    • Width: 36 in (91.44 cm)
    • Height: Min: 38 in (96.52 cm); Max: 48 in (1.22 m)
  • Conveyor Height: Min: 24 in (60.96 cm); Max: 34 in (86.36 cm)
  • Feed Speed : Fully variable 0-700 feet (0 to 213.36 m) per minute
  • Brushes :
    • 3 Nylon brushes (replaceable)
    • 0.040 in (1 mm) diameter
    • 8 strips per brush
  • Height Adjustment : Hydraulic hand pump
  • Dust Hook-up: 6 in (15.24 cm) diameter
  • Recommended Air Flow On Dust Pipe: 1,300 CFM (37 m³/min)
Power
  • 3 Brush Motors:
    • 2 HP (1.49 kw) each
    • TEFC on each brush.
  • Hopper Conveyor Drive: 1HP (.075 kw) variable speed gear box.
  • Electrical:
    • 240v or 480v,
    • 3-phase, 60 Hz (Standard).
    • All other voltages are available.
    • Completely prewired. NEMA 12 enclosure with disconnect, starter and circuit overload protection.
Capacities
  • Board Width: Up to 8 in (20.32 cm)
  • Board Height: Up to 2.5 in (6.35 cm)—modifications to this are available upon request)
  • Board Length: Min: 36 in (91.44 cm); Max: 55 in (139.70 cm) or longer if dead rollers are added
Options
  • Extra wide M4i DeDuster models 12“ (30.48 cm) capacity or 16“ (40.64 cm) capacity
  • Extra long lengths:
    • 24”-wide tailing conveyor with adjustable back stop
    • 36”-wide tailing conveyor with adjustable back stop

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74