Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Despuntadora de Doble Sierra-Cinta
Model Number: Despuntadora de Doble Sierra-Cinta



Height: 89 in. (226 cm)
Width: 94 in. (239 cm)
Length: 11 ft. (335 cm)

The Baker Band Double End-Trim uses bands instead of circular saws to quickly and efficiently end trim your material. It can be installed in existing lines allowing a continuous flow of material that doesn’t require stopping and restarting.

Why bands? The band blades, on the Baker Band Double End- Trim, slice effortlessly and accurately through your material. The Baker is much quieter than other double end-trims. And most of all, it doesn’t throw wood. The Baker Band Double End-Trim handles large volumes of lumber. It will accept any length, since it’s custom-built to your needs and it accepts  the highest throughput of any two-blade trim saw.

  • Will cut material to length at feed speeds up to 60 feet per minute
  • Manual crank handle for adjusting the width of cut of the material, with optional 5-point setworks as well
  • Two vertical headrigs with 13’- 2” thin-kerf band blades
  • Two variable speed hydraulic feed chains with squaring dogs
  • Spring blade tensioning
  • 12” wide waste conveyor for removal of waste
  • Uni-welded tube steel frame
  • Remote pedestal mounted electrical control start/stop station with E-stop button
  • Two 6” dust pipe connections for dust removal
  • Low maintenance
  • Low labor
  • Precision end-trimming made easy
Specifications
  • Production Rate : Varies according to type of material, thickness of cut, and rate of feeding.
  • Blade Guides: Baker Low-Profile Flat Guides with hardened steel guide plates
  • Dimensions & Weight:
    • Height: 89 in. (226 cm)
    • Width: 94 in. (239 cm)
    • Length: 11 ft. (335 cm)
    • Weight: 2,500 lbs. (1,134 kg)
  • Band Blades: 13 ft. 2 in. (4m) .035 in. thick (cuts with 0.072 in. kerf)
  • Optional 14 ft. 2 in. (4.32m) .042 in. thick (cuts with 0.072 in. kerf)
  • Band Wheels: 28 in. (71 cm) diameter; all-steel, with crown
  • Feed Speed: Variable, hydraulically-controlled, 0-120 feet per minute (0-36.5 meters per minute)
Power
  • HeadMotor: Two 20 HP (15kw) TEFC; 5 HP (4 kw)
  • 1,000 PSI hydraulic power unit on feedworks
  • NEMA 12 enclosure with starters, disconnects, control voltage transformer and circuit overload protectors; start/stop station with E-stop button
  • Electrical: All voltages available; Standard: 240v or 480v three phase 60Hz; machine completely prewired;
Capacities
  • Minimum Length: 24 in. (61 cm)
  • Maximum Length: 60 in. (152 cm)
  • Maximum Height: 6 in. (15 cm)
Options
  • Larger capacity models (for material up to 11” thick)
  • Custom Feedworks
  • Longer lengths available upon request

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74