Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Reaserradora Modelo Baker C & CX de Un Cabezal
Model Number: Reaserradora Modelo Baker C & CX de Un Cabezal



Length: 180” (4.57 m)
Width: “C” is 77” (1.96 m);
“CX” is 85” (2.16 m)
Height: 68” (2.03 m)

“C” & “CX” models incorporate Baker’s one-of-a-kind feedworks design that supports the wood in the direction of the cut for better stability and  higher accuracy. Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip.

Baker Band Resaws are made of a heavy-duty construction and are simple to maintain and operate. They can be built with as many heads as your production requires.

  • Spring tensioning system, standard. Air tensioning, optional.
  • 13’-2” x 1” x 0.035” band blades, standard. 13’-2” x 1¼” x 0.035”, optional.
  • Blade height adjustments can be made quickly via hand crank
  • Baker’s exclusive Low-Profile Flat Guide Plates and Guide Wheel System holds blade securely
  • 28”-diameter, CNC-machined, dynamically-balanced, all-steel band wheels
  • Simple to operate and maintain
  • Material is firmly held in place during the entire cut — the only 3-sided continuous feedworks on the market today!
  • Rough-top conveyor belting
  • Extra-wide “CX” models available
  • All three phase voltages available
  • Optional non-powered hold downs or powered hold downs for 4-sided feedworks

The standard smooth, reliable 3-point feedworks can be upgraded to 4-point feedworks with your choice of either a powered or non-powered Hold-Down.

Specifications
  • Number of heads: 1 to any number. Up to 9 heads on one single frame.
  • Guides: Baker Low-Profile Flat Guide System with steel guide plates.
  • Saw Dust Outlet: 6”x6” (15.24 cm x 15.24 cm) square with a 90° adapter chute to a 4” (10.2 cm) diameter outlet, which can be rotated to serve four directions of discharge. 600 CFM recommended (17 m³/min).

Dimensions and Weight:
  • Length: Single is 180” (4.57 m). Add 55” (1.4m) for every additional head
  • Width: “C” model is 77” (1.96 m); “CX” is 85” (2.16 m)
  • Height: 68” (2.03 m)
  • Weight: Single Model “C” is 3,500 lbs. (1,587kg). Add 2,000 lbs. (907 kg) per additional head. Single Model “CX” is 4,500 lbs. (2,041 kg). Add 2,500 lbs. (1,134 kg) per additional head.

Power Model “C” Main Drive Motor:

20 HP TEFC (30 HP optional)
15 kw TEFC (22 kw optional)


Model “CX” Main Drive Motor:

30 HP TEFC (40 HP optional)
22 kw TEFC (30 kw optional)


Optional Electric:

All 3-phase voltages available. Completely prewired. NEMA 12 enclosure with starter, disconnect and overload protection, and  start/stop stations.


Feedworks/Conveyor Hydraulic Motor:

On resaws with one to three heads,hydraulic motors are powered by the main motor on the last head. Resaws with more than three heads have a separate power pack with a 10-hp motor.


Feedworks and Capacities
  • 3-Sided Feedworks: Rough-top belting, powered side feed rollers, non-powered hold-over wheels, and optional hold-down wheel.
  • Feed Speed: Fully variable 20 to 120 fpm (6 to 36 meters per minute)
  • Conveyor width: “C” model = 6” (15 cm); “CX” model = 12” (30 cm)
  • Material Capacity: “C”=6” x 12” (15 cm x 30 cm); “CX”=12” x 12” (30 cm x 30 cm)
  • Optional Hold-Down Systems: Your choice of hydraulically powered or non-powered Hold-Down Wheel, making the feedworks 4-sided.

Blades Model “C”
  • 13’2” × 1” × 0.035” hardback
  • 13’2” × 1¼” × 0.035” hardback
  • 13’2” × 1½” × 0.035” hardback
Blades Model “CX”
  • 14’2” × 1” × 0.035” hardback
  • 14’2” × 1¼” × 0.035” hardback
  • 14’2” × 1¼” × 0.035” hardback

Options
  • Larger motors
  • Digital Read-out displaying the blade height
  • Hold-Down Wheel
  • Floating Air Guides
  • Hopper Feeder
  • TurnArounds
  • Computer setworks
  • Return Conveyor
  • Material Handling Conveyor
  • Air Tensioning System
  • Blade Tensioning: Spring, standard. Air tensioning, optional upgrade.

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74