Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Redondeador de Esquinas de Tarimas
Model Number: Redondeador de Esquinas de Tarimas



Length: 58 in. (147 cm)
Width: 32 in. (81 cm)
Height: 58 in. (147 cm)

The Baker Corner Rounder is a necessity for pallet manufacturers whose clients transport goods wrapped in plastic or other material that could get  ripped by sharp pallet corners. Simply insert one corner of a pallet or a board into the Baker Corner Rounder and press the two engage buttons on the remote operator’s control pedestal. A guard comes down, and a cutter head rounds off that corner. The guard then releases, allowing you to rotate the  pallet or board to round off another corner. Durably built out of steel, the Baker Corner Rounder will be a simple and effective tool to round out your pallet mill for decades.

  • Corner-rounds material up to 6” tall.
  • Corner-rounds wooden pallets and boards*.
  • Small footprint (30” wide by 40” deep).
  • 10-HP TEFC electric motor.
  • Completely prewired and tested.
  • Remote operator’s control pedestal with start and stop switches and cutter activating  palm buttons.
  • Large, flat tabletop 42” high for resting material on.
  • Adjustable left and right plates to help center and control the depth of cut.
  • Small 32”×58” footprint.
  • Durable steel construction.
Specifications
  • Production Rate: Around 90 pallets (each with 4 rounded corners) per hour
  • Cutters: One 10” (25.4 cm) circular convex cutter to make corners with 1” (2.54 cm) radius
  • Arbors: One 1 3/4” (4.5 cm) diameter arbor
  • Sawdust Removal: 6” (15.2 cm) opening, 2,000 CFM minimum recommended
  • Dimensions and Weight:
    • Length: 58” (147 cm)
    • Width: 32” (81 cm)
    • Height: 58” (147 cm)
    • Tabletop Height: 42” (106 cm)
    • Weight: 2,000 lbs. (907 kg)
Power
  • Motor: One 10 HP (7.5 kw) TEFC
  • Electrical: All voltages available;
  • Standard: 220V or 440V, 3-phase 60-Hz; machine completely prewired NEMA 12 enclosure with starters, disconnects, control voltage transformer  and circuit overload protectors; start/stop station with E-stop button, and two activation buttons to engage the cornerrounding action.
  • Operating Air Pressure: 120 PSI, 1/2” (13 mm); 30 CFM
  • Guard: Air-driven — only closes as far down as inserted material allows. Closes all the way if nothing is in the way.
Capacities
  • Material Size: Minimum 2” width Minimum 10” length Maximum 6” height
  • Corner Rounding Radius: 1” (2.54 cm) radius
  • Head Action: Spinning cutter head moves upward far enough to corner-round 6” worth of material in a vertical direction.
Options
  •  ½-inch radius (1.27 cm radius) cutter

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74