Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Scragg Mill de Banda Delgada Baker con Grapones Ex
Model Number: Scragg Mill de Banda Delgada Baker con Grapones Ex



Call for details on dimensions.

The Baker End-Dogging Scragg Mill can cut logs between 4 and 16 feet long with diameters as small as 6 inches. Use it to cut squares and boards. The end-dogging mill uses a hydraulic cylinder  to hold the log on both ends during the cut. This ensures maximum accuracy for each board or square.

The system can also rotate the log 90° before the second cut and allows the removal of as many boards as you desire before dropping the square. An optional operator controlled log centering system eliminates the guessing to position the log.

The Baker End-Dogging Scragg Mill comes either with thin-kerf bandsaws or circular saw blades.

  • Diesel or electric power
  • End-dogging hydraulic cylinder holds log at both ends during cut
  • Two (2) thin-kerf band saws or two (2) circular blades
  • Length of cut varies from minimum of 48” up to 16’ maximum (overhead enddogging cylinder has a range of 4’)
  • Remote command center with control console
  • 90° log rotation
  • Tailing belt
  • Hydraulic log loader
  • Heavy-duty construction
  • High Production
Specifications
  • Production Rate: Varies according to diameter of log, thickness of cut, feed speed and number of passes per log
  • Dimensions & Weight: Call for details
  • Band Blades:
    • Lengths: 13’-2” and 14’- 2” (401 cm and 432 cm)
    • Blade Widths: 1“(25 mm) and 1-1/4“ (32 mm)
    • Blade Thicknesses: 0.035“ and 0.042“
    • (0.89 mm and 1 mm)
    • Kerf is variable depending on set and teeth.
Power
  • Electric Motor: 20 HP (15 kw) on each band blade
  • Hydraulic power is derived from a self-contained hydraulic power pack with varies from 7.5 up to 15 HP (6 kw -11 kw) depending upon size required
Capacities
  • Log Diameter:
    • 6” (15.24 cm) min.
    • 12” (31 cm) max. using 13’-2” (401 cm) blade
    • 16” (41 cm) max. using 14’-2” (432 cm) blade
  • Log Length: 48” (122 cm) min. and up to 16’ (488 cm) max. Note: a Baker End-Dogging Scragg mill designed to accommodate 48”-long (122-cm-long) logs cannot accept logs longer than 8’ (2.44 m).
  • Material Thickness:
    • 3-1/2” (89 mm) min. and up to 12” (30 cm) max. using a 13' - 2" (401 cm) blade
    • 3-1/2” (89 mm) min. and up to 16” (41 cm) max. using a 14’- 2” (432 cm) blade
Options
  • 10 point programmable electronic setworks
  • Log infeed deck
  • Material handling conveyor

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74