Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Scragg Mill de Sierra Circular de Baker con Grapon
Model Number: Scragg Mill de Sierra Circular de Baker con Grapon



Call for details on dimensions.

The Baker End-Dogging Scragg Mill can cut logs between 4 and 16 feet long with diameters as small as 6 inches. Use it to cut squares and boards. The end-dogging mill uses a hydraulic cylinder to hold the log on both ends during the cut. This ensures maximum accuracy for each board or square. The system can also rotate the log 90° before the second cut and allows the removal of as many boards as you desire before dropping the square. An optional operator controlled log centering system eliminates the guessing to position the log.

The Baker End-Dogging Scragg Mill comes either with thin-kerf bandsaws or circular saw blades.

  • Each circular blade is powered by a 50-hp electric motor (up to 100 hp available). Band Scraggs have 20-hp electric motors.
  • End-dogging hydraulic cylinder holds log at both ends during cut
  • Two (2) thin-kerf band saws or two (2) circular blades
  • Length of cut varies from minimum of 48” up to 16’ maximum (overhead enddogging cylinder has a range of 4’)
  • Remote command center with control console
  • 90° log rotation
  • Tailing belt
  • Hydraulic log loader
  • Heavy-duty construction
  • High Production Features
Specifications
  • Production Rate: Varies according to diameter of log, feed speed, thickness of cut, and number of passes per log
  • Dimensions & Weight: (Call for details)
  • Blade Diameters: 
    • 40“ (102 cm)
    • 48“ (122 cm)
    • Both blades cut with a 5/16“ (8 mm) kerf
Power
  • Diesel Engine: 125-300 HP (93 - 224 kw) depending on application
  • Hydraulic power is derived from a self contained hydraulic pump which varies from 7.5 up to 15 HP (6 - 11 kw) depending  upon size required
  • Electric Motor: 50-100 HP (37 - 75 kw) depending on application
Capacities

  • Log Diameter:
    • 6” (15 cm) min.
    • 16” (41 cm) max. on 40” (102 cm) diameter blade
    • 18” (46 cm) max. on 48” (122 cm) diameter blade
  • Log Length:
    • 48” (122 cm) min. and up to 16’ (488 cm) max.
    • Note: a Baker End-Dogging Scragg Mill designed to accommodate 48”-long (122-cmlong) logs must have its end-dogging clamp adjusted to accept logs longer than 8’ (2.44 m).
  • Material Thickness:
    • 3-1/2“ (89 mm) min. and up to 12” (30 mm) max. using 40” (102 cm) blade
    • 3-1/2“ (89 mm) min. and up to 16” (41 cm) max. using 48” (122 cm) blade
Options
  • 10 point programmable electronic setworks
  • Log infeed deck
  • Material handling conveyor

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74