Contáctenos al (800) 548-6914
Para Español al (812) 391-4588
COMPRA DE PRODUCTOS
EQUIPOS NUEVOS
Reaserradoras de Un Solo Corte
Reaserradoras de Corte Múltiple
Aserraderos de Sierra Cinta
Scragg Mills
Desorilladoras de Tablas
Sierras Tronzadoras y Recortadoras
Resacadoras / Equipos para Tarimas
Desempolvadores de Tablas
Cepillos / Molduradoras
Transportadores / Plataformas de...
Equipos Especiales de Baker
Bastidores para Apilamiento de M...
Depósito de Acero de Auto Descarga
EQUIPOS USADOS
VENTAS EN CONSIGNACIÓN
INVENTARIO EN STOCK
PRODUCTOS DESTACADOS

Tri-Scragg Mill de Sierra-Circular de Baker
CONOZCA MAS

Sierras Recortadora Manual y Activadas Neumáticame
CONOZCA MAS

Reaserradora Modelo Baker C & CX de Un Cabezal
CONOZCA MAS

Aserradero BP Dominator™
CONOZCA MAS

Resacadora Doble Baker X2 de Doble Saque
CONOZCA MAS
Desempolvador de Tablas Alimentación Lateral Side
Model Number: Desempolvador de Tablas Alimentación Lateral Side



Length: 93 in. (236.22 cm)
Width: 98 in. (249 cm)
Height: 51 in. (129.54 cm)

Even faster than the Baker M4 DeDuster™, the M6 “Sidewinder” Sideways DeDuster is capable of dedusting boards coming out of a resaw with five or more heads! It is the dedusting cream of the crop for high-production facilities.

The key change in design between the M4 and the M6 is wood flow. Whereas the M4 is hopper fed with boards going through end-toend, the M6 feeds boards through side-to-side, increasing efficiency by 91%. There are other benefits to sideways dedusting, as well. Brushing is done parallel to the cut lines left by the resaw blades, so the brushes get into the grooves, cleaning out trapped particles that other dedusters might leave behind.

Another advantage of sideways dedusting is the positive, non-slip board feed and separation. Two chains pull the boards through one at a time without slipping. This also helps separate boards that are stuck together with frozen saw dust.

The Baker M6 DeDuster’s dust chamber is set up to use a 6-inch dust collection pipe to remove saw dust. The Baker M6 DeDuster comes with its own electrical panel and a stand-mounted, remote start/stop control station.

Specifications
  • Dimensions:
    • Length: 93 in. (236.22 cm)
    • Width: 98 in. (249 cm)
    • Height: 51 in. (129.54 cm)
    • Weight: 2,440 lbs. (1,107 kg)
  • Conveyor Height:
    • Infeed Conveyor: 34 in. (86.36 cm)
    • Inclined Outfeed Conveyor: 34½ in. (87.63 cm) at the highest point.
  • Feed Speed: 140 feet per minute (43 meters per minute)
  • Brushes: 2 Nylon brushes (replaceable) 0.040 in (1 mm) diameter Spiral
  • Dust Hook-up: 6 in (14.25 cm) diameter Recommended Air Flow: 2,000 C.F.M. (942 liters per second) recommended. 1,750 C.F.M. (826 liters per second) minimum.
  • Recommended Air Flow: 1500 C.F.M. (703 liters per second)
Power
  • Four (4) Electric Motors:
    • One 2-HP (1.49 kw) TEFC
    • Three 1-HP (¾ kw) TEFC
  • Electrical:
    • 240v or 480v.
    • 3 Phase 60 Hz (Standard)
    • All other voltages are available.Completely prewired. NEMA 12 enclosure with disconnect, starter and circuit overload protection.
Capacities
  • Board Width: 3½ to 6 in (8.9 to 15.2 cm)
  • Board Height/Thickness: .39 in (1 cm) to 1¾ in (4.4 cm)—modifications to this are available upon request)
  • Board Length: Minimum: 28 in (71.1 cm) Maximum: 62 in (157.5 cm)
Options
  • Automatic Board Stacker
  • 24”-wide or 36”-wide tailing conveyors
  • Multi-Head Baker Band Resaws
  • Stacking Racks
  • Dust removal via auger or conveyor belt

Especificaciones de producto sujetas a cambios sin previo aviso.





 



2012 © Propiedad Literaria de Baker Products. Todos los Derechos Reservados.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74